MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
Cleaner servo valves, less chances for sticking
Superior thermal stability, avoid the formation of sludge even at high temperature.
Superior filterability increase filter life.
Multi- metal compatibility under wet and dry conditions
Good demulsibility ensuring rapid water separation in the case of water getting into the circuit.
Excellent protection against rust and corrosion ensuring maximum equipment life
Rapid air release property minimizes chances of pump cavitation leading troubles for operations.
MEETS REQUIREMENT OF: DIN 51524 PART 2 (HLP); SAE MS 1004 (HM); ISO 11158 (HM); ASTM D6158 (HM);
DENISON HF-0/HF-1/HF-2 (APPROVED); EATON E-FDGN-TB002-E; CINCINNATI MACHINE P-68/P-69/P-70; BOSCH
REXROTH RDE 90235/45; GM LS-2; JCMAS P041 HK; SEB 181222; CONESTOGA PUMP TEST ISO 20763; AIST
126/127
HYDEN AW SERIES are recommended for all mobile and stationary hydraulic system operating under severe conditions, it’s also can be used in circulation, splash and ring oil lubricants system where these kind of lubricants recommended.
©️ 2024 MAG Lubricants - Inside Engineering. All rights reserved
Privacy Policy
Terms & Conditions
FAQs